★ BEST COVERAGE – 3D Curved Edge curve protection, Our Premium Japanese glass is precision manufactured to follow the curvature and contours of the REDMI NOTE 13 PRO + 5G screen, meaning you’ll get edge protection. Our premium glass is ultra smooth and highly touch-responsive.
★ SOLUTION FOR ULTRASONIC FINGERPRINT – Advanced Liquid Optical Clear Adhesive Technology and eZell Tel Glass which makes solution for REDMI NOTE 13 PRO+ 5G new ultrasonic in-display fingerprint sensor.
★ LIQUID DISPERSION TECHNOLOGY – Our liquid evenly disperses over your entire screen for your NOTE 13 PRO +, including existing scratches and scuffs, and hardens to create an impenetrable edge-to-edge barrier while repairing former cracks and imperfections.
★ High-Quality Full Back 3D Carbon Fiber Skin For REDMI NOTE 13 PRO+ Make your REDMI NOTE 13 PRO Plus 5G Transparent Clear-Greatly Display its Original Beauty
★ Zigzag Line better enables handset cooling Importantly Protect from scratch & dust Carbon Fiber Skin-Non-slip Hand Grip. Matte Film Contributes to Good Anti-Glare Effect for NOTE 13 PRO +.
14 in stock
₹377.00 ₹1,200.00
14 in stock
| Weight | 0.150 g |
|---|---|
| Dimensions | 25.5 × 10 × 6.5 cm |
| Brand | eZell |
| Compatible Devices | REDMI NOTE 13 PRO Plus 5G |
| Material | Tempered Glass & Back Skin |
| Item Hardness | 9H |
| Product Dimensions | 15L x 7W Centimeters |
| Compatible Phone Models | REDMI NOTE 13 PRO Plus |
| Special Feature | Touch Sensitive, Curved Tempered Glass, Anti-Fingerprint, Anti-Glare, Scratch Resistant |
| Finish Type | TPU Plastic |
| Net Quantity | 1.00 Grams |
| Screen Size | 6.7 Inches |
Product Description:-
How to install it:
Step 1: Clean the screen with the wet wipe and cloth and remove any case from your NOTE 13 PRO +
Step 2: Stick the keyhole with a label, and then use a knife or scissor to open the liquid adhesive box, and drop it on the screen(It is recommended that the glue be poured completely. The glue that drops on the screen can’t have air bubbles, if there is air bubble, use the needle to pierce the air bubble to let go air. )
Step 3: Place the screen protector in a suitable position on your device SLOWLY. PLEASE DO NOT LIFT AND PRESS THE GLASS TO LET THE ADHESIVE SPREAD, JUST LET IT AUTOMATICALLY DISPERSION.(Very important)
Step 4: Wait for about half 30 Secs to let the adhesive spread and level.
Step 5: If the adhesive overflows, wipe it off with a clean cloth. After checking the retention criteria for the mobile phone’s tempered film, the lamp was turned back and forth several times around the edge of the phone, and after 3 seconds of initial curing (not in the middle), the edge glue was wiped again until the glue overflowed. (Prevent white edges or long bubbles on edges)
Step 6: Wait for the exhaust to complete, after the glue overflows cleanly, after the positioning standard of the tempered film is satisfied, turn on the light. Otherwise scrapped material.
Step 7 : Irradiate the mobile phone under UV lamp and need to illuminate twice for about 3 minutes to reach the fully-cured position. * Use Only Basic TypeC / Micro USB TypeB Chargers Fast / Turbocharger might not work properly
Step 8: Clear the screen, and turn off the UV lamp for reuse.
Package includes:
Handling and Packing:
Packing is done with a good amount of care so that you get the item in good condition. it is your responsibility to ensure that the packet received is in non-tampered condition. If the pack is open please refuse to receive the order and return it to same logistics person
Tested product.
There are no reviews yet.