, ,

eZell UV Tempered Glass with Back protector for Vivo X90 pro Plus (2N1) Combo by Ctel, UV Curved TEMPERED GLASS + Back Screen Protector (Transparent) with dry and wet wipes

SKU: EZ554-Vivo X90 pro Plus

★ BEST COVERAGE – 3D Curved Edge curve protection, Our Premium Japanese glass is precision manufactured to follow the curvature and contours of the VIVO X90 PRO PLUS screen, meaning you’ll get edge protection. Our premium glass is ultra smooth and highly touch responsive.

★ SOLUTION FOR ULTRASONIC FINGERPRINT – Advanced Liquid Optical Clear Adhesive Technology and eZell Tel Glass which makes solution for Vivo X90 pro+ new ultrasonic in-display fingerprint sensor.

★ LIQUID DISPERSION TECHNOLOGY – Our liquid evenly disperses over your entire screen for your Vivo X90 pro+ , including existing scratches and scuffs, and hardens to create an impenetrable edge to edge barrier while repairing former cracks and imperfections.

★ High Quality Full Back 3D Carbon Fiber Skin For VIVO X90 PRO PLUS Make your Vivo X90 pro+ Transparent Clear-Greatly Display its Original Beauty

★ Zigzag Line better enable handset cooling Importantly Protect from scratch & dust Carbon Fiber Skin-Non-slip Hand Grip. Matte Film Contributes to Good Anti-Glare Effect for Vivo X90 pro+


10 in stock

567.00 1,200.00

10 in stock

Weight 0.150 g
Dimensions 25.5 × 10 × 6.5 cm
Brand eZell
Compatible Devices Vivo X90 PRO PLUS
Material Tempered Glass & Back Skin
Item Hardness 9H
Product Dimensions 17.21 Centimeters
Compatible Phone Models VIVO X90 PRO PLUS
Special Feature Touch Sensitive, Anti-Fingerprint, Anti-Glare, Scratch Resistant, Bubble Proof
Finish Type Glossy
Water Resistance Level Waterproof
Net Quantity 1.00 Piece

How to install it:

Step 1 : Clean the screen with the wet wipe and cloth and removing any case from your Vivo X90 pro Plus Step 2 : Stick the key hole with a label, and then use a knife or scissor open the liquid adhesive box, drop it on the screen(It is recommended that the glue be poured completely. The glue that drops on the screen can’t have air bubbles, if there is air bubble, use the needle to pierce the air bubble to let go air. ) Step 3 : Place the screen protector to a suitable position on your device SLOWLY. PLEASE DO NOT LIFT AND PRESS THE GLASS TO LET THE ADHESIVE SPREAD,JUST LET IT AUTOMATIC DISPERSION.(Very important) Step 4 : Wait for about half 30 Secs to let the adhesive spread and level. Step 5 : If the adhesive overflow, wipe off with a clean cloth. After checking the retention criteria for the mobile phone’s tempered film, the lamp was turned back and forth several times around the edge of the phone, and after 3 seconds of initial curing (not in the middle), the edge glue was wiped again until the glue overflowed. (Prevent white edges or long bubbles on edges) Step 6 : Wait for the exhaust to complete, after the glue overflows cleanly, after the positioning standard of the tempered film is satisfied, turn on the light. Otherwise scrapped material. Step 7 : Irradiate the mobile phone under UV lamp and need to illuminate twice for about 3 minutes to reach the fully-cured position. * Use Only Basic TypeC / Micro USB TypeB Chargers Fast / Turbo charger might not work properly Step 8 : Clear the screen, and turn off the UV lamp for reuse. Package include: 1)Curved 3D Edge Glass for Vivo X90 pro Plus 2)UV Glue 3)UV Light * Free 4)2N1 Wipes Wet&Dry 5)BackSkin Handling and Packing: Packing done with good amount of care so that you get the item in good condition. it is your responsibility to ensure that the packet received is in non-tampered condition. If the pack is open please refuse to receive the order and return it with same logistics pe

Based on 0 reviews

0.0 overall

Be the first to review “eZell UV Tempered Glass with Back protector for Vivo X90 pro Plus (2N1) Combo by Ctel, UV Curved TEMPERED GLASS + Back Screen Protector (Transparent) with dry and wet wipes”

There are no reviews yet.